Product Brief
Sales & Technical SupportApplications
- USB 2.0
- Certified HUB operation
- Device with I2S,interface and HID Class microcontroller interface
- Downstream ports: 3
- Host-to-Host Bridge enables dual role functionality for Apple CarPlay®
- Arm® Cortex® M0 core with 160kB FLASH and 8kB SRAM memory
- Integrated Dual USB PD 3.1 controller and support for Type-C connectors
- Flexible USB Charging Emulator Terminations enables USB BC1.2 DCP/CDP and support for Apple and Samsung charging detection
- Protection against USB DP/DM pins to shorted ground and VBUS as well as protection against CC port shorts to ground
- Integrated USB frequency synthesis (external crystal required)
- Integrated power management unit for core digital
- I2C/SPI Master, UART and LIN interfaces
Features
- USB 2.0 Hi-Speed HUB
- USB HUB with Apple CarPlay and Android Auto support
- USB PD Charging Downstream Ports with support for Type A and Type C connectors
Functional Diagram
iND10050 is an Automotive USB HUB with advanced functionality including high-speed 480 MB/S ports, Apple CarPlay and Android Auto, and USB Type C power delivery capabilities.
The device is a combination of USB Hub with an integrated USB Device supporting two interfaces: I2S audio interface and a HID Class microcontroller access side-channel. iND10050 can support up to three external downstream ports, each of which can withstand an indefinite short of the DP/DM pins to 5V.
iND10050 also implements a USB Host to Host Bridge component that enables dual role functionality at a downstream USB Hub port, allowing them to connect to a vehicles infotainment system via Apple CarPlay without requiring a special cable.
iND10050 features two integrated USB-PD 3.1 controllers and port control and configuration channel (CC) for support of USB Type-C connectors.
The device contains a flexible charging emulator termination (FCET)that allow each port to independently function as a USB battery charger.
The FCET supports USB BC1.2 DCP/CDP specification as well as support for Apple and Samsung proprietary Charging Modes. In addition, the dual integrated USB PD 3.1 controllers reduce the cost of implementing a data plus power solution.
iND10050 features an integrated Arm® Cortex M0 microcontroller that mediates data transfers to and from the USB Device. The Arm Cortex M0 microcontroller can also mediate the handshaking required for successful flexible charging emulator termination implementation.
iND10050 includes an integrated power management block (PMU) directed connected to the car battery, from which all the supplies require by the device are generated. It also contains an I2C, SPI master interface, UART, and LIN interface, all of which can be used to communicate with other integrated circuits on a product board.
| Part Number | Operating Temperature | Package |
|---|---|---|
| iND10050QGA | -40°C to +125°C | 8mm, 56-pin QFN 0.5mm pitch |
In addition to the iND10050, indie offers additional automotive USB HUB solutions iND10049 and iND10051. The table below outlines the unique properties of each device.
| Feature Description | iND10049 | iND10050 | iND10051 |
|---|---|---|---|
| SD Card Reader | Yes | No | No |
| Apply CarPlay / Android Auto Support | Yes | Yes | Yes |
| Data Hub | Yes | Yes | Yes |
| Downstream Facing Ports | 3 | 3 | 2 |
| USB 2.0 HUB | Yes | Yes | Yes |
| USB Data Rate | 480 Mbps | 480 Mbps | 480 Mbps |
| USB BC v1.2 | Yes (7.5W) | Yes (7.5W) | Yes (7.5W) |
| USB Type-C Support | No | Yes (15W) | Yes (15W) |
| USB-PD PHY Controller v3.1 | No | Yes | Yes |
| USB Power Delivery | No | w/External Supply | w/External Supply |
| LIN/UART/I2C | No | Yes | Yes |
| SPI, I2S Audio | Yes | Yes | Yes |
| Package | 8×8 mm 56-Pin QFN | 8×8 mm 56-Pin QFN | 8×8 mm 56-Pin QFN |